The first model of a Rhineadora track machine. This boasts a revolutionary continuous work system for railway maintenance developed by IMF. The Rhino guarantees perfect track positioning. At the same time, it registers and assures optimal track compaction in the ballast bed. All of this is achieved with one simple, compact and efficient machine.
The omega version is valid for work on tracks with and without turnouts.
Technical characteristics
General characteristics
| Maximum speed | 100 km/h |
| Maximum speed in train formation | 100 km/h |
| Cabs | 1+1 |
| Work places | 1 |
Dimensions
| Gauge | Adaptable |
| Length without buffers | 18000 mm |
| Maximum width | 2520 mm |
| Maximum height | 3480 mm |
| Total weight | 52000 kg |
Railway Running Gear
| Number of axles | 2 |
| Drive axles | 2 |
| Distance between bogies | 12000 mm |
| Track gauge | 1000/1067 mm |
| Wheel diameter | 730 mm |
Engine
| Make | Deutz (or similar) |
| Type | TCD 2015 V08 (or similar) |
| Horsepower | 500 kW (or similar) |
Traction
| Type | Hydrostatic |
| Pump | 3x REXROTH |
| Engine | 2x REXROTH |
Working characteristics
| Lifting and slewing unit | 1 |
| Tamping unit | 2 |
| Compaction unit | 1 |
| Compaction load | Up to 30 tonnes |
| Work cycle | Continuous |
| Maximum speed | Up to 800 m/h |
Measurement System
| Measurement trolleys | 4 |
| Alignment cables | 1 |
| Levelling cables | 2 (1 per rail) |
| Integrated Geometry System | SIG |
| Integrated Digital Register | RID |
Optional
| Air drier | |
| Master remote system |
For further information, please contact us.